Power and Energy
Two-stage robust optimization strategy for spatially-temporally correlated data centers with data-driven uncertainty sets
- Categories:
78 Views
The dataset includes active power measurements for a residential dwelling (apartment) located in Bucharest, Romania, collected at 1s second reporting rate over several months.
Always-on appliances include the refrigerator and the wireless router. Several other appliances are installed in the residential unit: washing machine, lighting fixtures, electrical iron, vacuum cleaner, various ICT charging devices, and air conditioning (seldom used).
- Categories:
1032 Views
The accessible dataset is related to the paper entitled "Synchronization Stability of Interconnected Inverter-based Microgrids". It includes the MATLAB codes to regenerate the sensitivity analysis results, which are used to study stability of interconnected microgrids.
- Categories:
193 Views
This data file provides the MATLAB code to reconfigure the distribution networks using a fast and simple two-stage heuristic approach.
- Categories:
292 Views
Supplementary material and additional information are provided in this report to complement the data in the paper: “Model-Matching Control for Low Switching Frequency Converters Unifying Different Performance Requirements”.
- Categories:
166 Views
The dataset reflects a single household (home) power profile related to the grid. Households include typical appliances, two air-to-air heat pumps, a 3-phase 18 kW through-flow water heater, 6 kW solar panels and a 2,5 kW charger for the electric car.
For five-month (April_August) in 2022, every 0.2 sec took each 3-phase voltage and current measurement, calculate power and harmonics (up to 15th) for power profile registration.
Positive value reflects energy flow from the grid to a household, and negative values are energy flow to the grid.
- Categories:
1071 Views
The dataset contains two industrial cases with measurement devices installed at the medium voltage bus entrance and at the target load to be identified. It can be used for the research of non-invasive load monitoring algorithms. The types of data measured include three-phase voltage, current, active power, reactive power, as well as the amplitude and phase angle of each harmonic.
- Categories:
1094 Views
The code synthesizes a transfer function with real poles from tabulated frequency response data. The reproducible run of this capsule will synthesize the impedance matrix of a 500-kV double-circuit overhead power transmission line and also that of a 250-kV dc submarine power cable.
- Categories:
114 Views
Device fingerprinting is a technique for remote indirect identification or classification of a device of interest. This database is designated for device fingerprinting by current consumption; it includes current recordings for 22" computer displays from 40 devices - 20 Dell P2217H and 20 Dell E2214H. Two signals for each device were sampled independently and sequentially to provide independent train and test parts. Each sampled signal includes a 250-second recording at a 50kHz sampling frequency.
- Categories:
186 Views
Due to the range of battery capacities in different electric vehicles (EVs), wireless power transfer (WPT) systems need to have a large variation in the output power. Since conventional systems are usually designed for a custom specification, the power and efficiency may be significantly reduced due to the need for interoperability between ground assembly and vehicle assembly with different power ratings. To address this issue this paper proposes a DC-link parallel AC-link series (DPAS) multi-inverter multi-rectifier (MIMR) architecture for high-power WPT systems.
- Categories:
97 Views